Service request failed: Invalid URI: Invalid port specified

* Technical questions about the grid, servers and viewers
* Technische Fragen über das Grid, Server und die Viewer

Service request failed: Invalid URI: Invalid port specified

Beitragvon Yukichan » Di 30. Jun 2015, 10:08

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

Hi, I have set up 4 regions on my self-managed estate, I see them on the map and I have the loop-back router set up (the .bat file says its correct) but I cannot tp to any of the four regions and neither can a friend of mine who tried. When I check the status of my Nat Loopback router on the Network and Sharing center, its characterized as an Unidentified Network with no network access and states that no packets are being received. Any suggestions or ideas how this can be fixed?

I've been through all the tutorials and all appears correct. as far as I can tell - any help will be appreciated. Oh my regions are Yukichanya and Yukichanya2, 3 and 4. Thanks!
Benutzeravatar
Yukichan
 
Beiträge: 8
Registriert: Do 25. Jun 2015, 18:43

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Ska Skaduwee » Di 30. Jun 2015, 12:12

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

hallo
ich komme auch nicht auf eine der Regionen
Fehler: Service request faild Invalid URI Invalid Port spezified
Bitte poste die Regions.ini
Dort sollten die Ports 9051 bis 9054 für Region 1 bis 4 eingetragen sein.
die Portfreigeaben müssen folgende sein:
UDP + TCP : 8001
UDP + TCP : 9000
UDP + TCP : 9051
UDP + TCP : 9052
UDP + TCP : 9053
UDP + TCP : 9054

I do not get to one of the regions
Error: Service Request faild Invalid URI Invalid Port spezified
Please post the Regions.ini
There, the ports should be 9051 to 9054 entered for Region 1 to 4.
the Portfreigeaben must be the following: see above
Ska Skaduwee
 
Beiträge: 170
Registriert: Sa 21. Jul 2012, 16:03
Wohnort: absurdistan

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Yukichan » Di 30. Jun 2015, 13:31

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

Nat setup 1.jpg

Wanted you to see this as well as below

Hi thank you for responding. Here is regions.ini

[Yukichanya]
RegionUUID = 0b154315-fff0-46aa-8e24-588830e68d9c
Location = 7037,7001
SizeX = 256
SizeY = 256
SizeZ = 256
InternalAddress = 0.0.0.0
InternalPort = 9051
AllowAlternatePorts = False
ExternalHostName = SYSTEMIP
MaptileStaticUUID = 00000000-0000-0000-0000-000000000000
[Yukichanya2]
RegionUUID = 3788d07b-bfb2-41b3-90b0-c67e5dec4831
Location = 7037,7002
SizeX = 256
SizeY = 256
SizeZ = 256
InternalAddress = 0.0.0.0
InternalPort = 9052
AllowAlternatePorts = False
ExternalHostName = SYSTEMIP
MaptileStaticUUID = 00000000-0000-0000-0000-000000000000
[Yukichanya3]
RegionUUID = 26e09b78-ab57-43eb-8837-4f0b1941a632
Location = 7038,7002
SizeX = 256
SizeY = 256
SizeZ = 256
InternalAddress = 0.0.0.0
InternalPort = 9053
AllowAlternatePorts = False
ExternalHostName = SYSTEMIP
MaptileStaticUUID = 00000000-0000-0000-0000-000000000000
[Yukichanya4]
RegionUUID = 3aa5e34d-1f6b-42f8-80f1-c5c30a27a766
Location = 7038,7001
SizeX = 256
SizeY = 256
SizeZ = 256
InternalAddress = 0.0.0.0
InternalPort = 9054
AllowAlternatePorts = False
ExternalHostName = SYSTEMIP
MaptileStaticUUID = 00000000-0000-0000-0000-000000000000

thanks again for your help!
Benutzeravatar
Yukichan
 
Beiträge: 8
Registriert: Do 25. Jun 2015, 18:43

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Eryn Galen » Di 30. Jun 2015, 15:54

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

Hi,
are you per Chance using HDCP for assigning the internal IP in your Network? That would mean that the signal possibly does not arrive at the right Computer (where your opensim is running).
Benutzeravatar
Eryn Galen
 
Beiträge: 972
Registriert: So 13. Jan 2013, 22:48

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Sheera Khan » Di 30. Jun 2015, 18:33

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

Hi Yukichan,

as far as I can see in your screenshot above port 9000 isn't forwarded. So the simulator itself wouldn't get any network packets. Each simulator needs its own http_listener port, if you run all your regions on the same simulator that's most probably port 9000. If you run several simulators on your machine you would need a specific port for each instance.

Ciaoo

Sheera
Benutzeravatar
Sheera Khan
 
Beiträge: 969
Registriert: Fr 22. Mär 2013, 14:18

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Yukichan » Di 30. Jun 2015, 18:35

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

Pardon my ignorance - please tell me how I should do the set up of that port? what would the application be? When you say Simulators you mean the 4 regions I have set up? - is my port assignment for them ok?
Benutzeravatar
Yukichan
 
Beiträge: 8
Registriert: Do 25. Jun 2015, 18:43

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Mareta Dagostino » Di 30. Jun 2015, 19:03

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

It is a question about the number of OpenSim.exe programs running simultaneously on your computer. Each OpenSim.exe needs its own ini files and its own http listener port. To ensure what is your port, you can take a look into the OpenSim.ini, section [Network] entry "http_listener_port = 9000" or whatever, 9000 is the default.

So, if your http listener port is 9000, then you need to open port 9000 for TCP in the router and eventually also in the firewall.
https://hyperweb.eu => Server-Tutorial für Linux mit OpenSim, konfigurierter OpenSim Arriba Binärdownload!
Benutzeravatar
Mareta Dagostino
 
Beiträge: 757
Registriert: Sa 29. Jan 2011, 20:26

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Yukichan » Di 30. Jun 2015, 19:16

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

Nat setup 1.jpg
nat setup.jpg
;# {http_listener_port} {} {TCP Port for this simulator to listen on? (This must be unique to the simulator!)} {} 9000
;; Simulator HTTP port. This is not the region port, but the port the
;; entire simulator listens on. This port uses the TCP protocol, while
;; the region ports use UDP.
http_listener_port = 9000

Copied from OpenSim.ini
So would my setup page look like the screenshot above? The firewall is set up to allow OpenSim - should not be the problem
Benutzeravatar
Yukichan
 
Beiträge: 8
Registriert: Do 25. Jun 2015, 18:43

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Mareta Dagostino » Di 30. Jun 2015, 19:21

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

Yes, that's fine! :-)

Port 9000 is open in the router for all protocols (that is TCP and UDP), and you have set port 9000 in OpenSim.ini. What you can check additionally is if you eventually have blocked ports in a firewall on your computer. If so, open there the same ports as on the router.
https://hyperweb.eu => Server-Tutorial für Linux mit OpenSim, konfigurierter OpenSim Arriba Binärdownload!
Benutzeravatar
Mareta Dagostino
 
Beiträge: 757
Registriert: Sa 29. Jan 2011, 20:26

Re: Service request failed: Invalid URI: Invalid port specif

Beitragvon Yukichan » Di 30. Jun 2015, 20:40

Translate to English translate to German Translate to French Translate to Italian Translate to Spanish Translate to Portuguese Translate to Czech Перевести на русский язык 翻译成中国

[I've done everything you all suggested ( I think) but I still have the same problem, so I went looking at my Network and Sharing center and discovered this problem - does anyone know what I need to do to fix this?

the problem.jpg


If I run NAT_Loopback_Tool.bat, it says everything is fine, but its not working - anyone can help with this? Please?

attachment=0]internet protocol.jpg[/attachment]
Dateianhänge
internet protocol.jpg
Benutzeravatar
Yukichan
 
Beiträge: 8
Registriert: Do 25. Jun 2015, 18:43

Nächste

Zurück zu Technical Support / Technische Unterstützung

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast



Powered by phpBB

Deutsche Übersetzung durch phpBB.de
.

Style designed by Artodia.